Best Guide to Tools

By Dakota Caudilla

Ever heard the saying ‘women want babies, men want power tools!’ – it’s true. Most men would trade their remote controls just to have the coolest and most technologically advanced power tools there are in the market. in fact, I know of one man who would instantly trade his car in just to have the Bosch 1” SDS-plus BullDog Xtreme Rotary Hammer. BullDog Xtreme seems to have stolen the limelight from many other equally cool power tools from other power tool manufacturers. Even brands under the same power tool manufacturer dimmed in light of the launching of BullDog Xtreme.

Not to mention, some men happen to think that the Dewalt DW723 Miter Saw and the power tool stand are the best creation of man ever since beer was invented! A power tool like the Dewalt DW723 needs a sturdy stand that is versatile, stable and complete.

If you’re looking for a power tool like a drill that will fit into little nooks and crannies, let us tell you that the Panasonic 15.6 Volt drill/driver has been receiving rave reviews from the consumers. The batteries for this power tool can last a remarkably long time. The motor for this power tool is so versatile that it packs up to 390 inch-pounds of torque. It’s hard to find another power tool to match that, frankly speaking.

Speaking of drilling, for power tools addicts, you’ve just got to get the Paslode 900420X IM350-CT Impulse Cordless Framing Nailer. The Contractor’s Performance Pack comes with extra batteries, tools for charging the nailer in your car, 2 fuel cells, lube oil, degreaser cleaner and safety goggles too. This power tool pack is truly going to make your experience a very convenient one. Setting the power tool up is a no brainer and on top of that, this powerful power tool is extremely light – weighing in at only 6.9 lbs. This power tool has an indicator light so that you’ll know when the battery is running low. The cycle rate rate is about 2 to 3 nails per second. Top performance power tool! With the Constructor’s Performance Pack, you don’t have to worry about running out of power because you can charge the power tool’s battery up and when one battery runs out, you can just stick the extra battery into the power tool and just keep on going.

For power tool lovers, you’ll also love the Makita 6347DQDE 18-Volt Cordless Driver-Drill kit. This power tool kit comes is a 2-speed driller that is as versatile as it comes. This power tool comes with 2-batteries (no extra charge), Phillips/slotted bit, charger and an Pack-and-Carry case. This power tool comes with 2 18-Volt Ni-MH batteries, therefore, you can expect a longer run time with this power tool. This power tool also comes with Industrial ½” keyless chuck with easy replacement of brushes.

Have fun with your power tools!

By Andrew Strachan

The power tools of today are not the same as the ones that were carefully placed on the pegboard near your grandfather’s workbench- they are actually quite far from it. Modern technology has made amazing advances in the simplest of features, including automatic shut-off, enhanced guarding and more resilient materials just to name a few. But one trait has come to be worth its weight in gold within the power tool industry, and that’s the owner’s manual.

Today’s manuals not only have better graphics showing its users what each part of the device should look like (and what to do when it doesn’t), many individual manufacturers will have explicit directions and instructions for the safety and maintenance of each individual power tool. Of course, no instructions are completely fool proof, especially if the content of such manuals isn’t completely understood by the user. This is why many manufacturers have implemented training seminars and classes for both companies and individuals on the proper procedures for optimum performance and safety. Local home improvement stores often hold such classes and seminars on a regular basis.

However, a bit of common sense and know-how never hurt anyone, so there are a few safety guidelines which should be followed by all users of power tools. For example, wearing the proper clothing is essential, and you should never wear loose clothing that could easily get caught in a power tool. Safety gear is crucial- hard hat, safety goggles and gloves, along with the proper footwear. Using the right tool, whether it be size or something else, for the job at hand, including the right type of extension cord (indoor, outdoor, proper length) if applicable. The work area should be clean, uncluttered and well lit. Keep all electric tools away from water and flammables. Do not use power tools with frayed or damaged cords. Damaged parts anywhere in a power tool, including saw blades and drill bits, can cause damage to the tool itself or the individual performing the task. Unplug all electric power tools when finished with or before changing to another tool.

As far as the maintenance aspect of such power tools, common sense is again of the highest importance. For example, making sure that the proper guards are placed on saw blades when not in use is both a safety and maintenance issue. Saw blades need to be sharp to deliver the best performance possible, but can also be incredibly dangerous, so taking the proper preventive measures will yield the best results in all aspects, not just project outcome.

For more information on power tool basics, the U.S. government has many publications that can be of high value to consumers. The U.S. Consumer Product Safety Commission offers product recall information, and OSHA has a few such publishings regarding both general industry and personal use of power tools.

By Debbie Johnston

The power tools of today are not the same as the ones that were carefully placed on the pegboard near your grandfather’s workbench- they are actually quite far from it. Modern technology has made amazing advances in the simplest of features, including automatic shut-off, enhanced guarding and more resilient materials just to name a few. But one trait has come to be worth its weight in gold within the power tool industry, and that’s the owner’s manual.

Today’s manuals not only have better graphics showing its users what each part of the device should look like (and what to do when it doesn’t), many individual manufacturers will have explicit directions and instructions for the safety and maintenance of each individual power tool. Of course, no instructions are completely fool proof, especially if the content of such manuals isn’t completely understood by the user. This is why many manufacturers have implemented training seminars and classes for both companies and individuals on the proper procedures for optimum performance and safety. Local home improvement stores often hold such classes and seminars on a regular basis.

However, a bit of common sense and know-how never hurt anyone, so there are a few safety guidelines which should be followed by all users of power tools. For example, wearing the proper clothing is essential, and you should never wear loose clothing that could easily get caught in a power tool. Safety gear is crucial- hard hat, safety goggles and gloves, along with the proper footwear. Using the right tool, whether it be size or something else, for the job at hand, including the right type of extension cord (indoor, outdoor, proper length) if applicable. The work area should be clean, uncluttered and well lit. Keep all electric tools away from water and flammables. Do not use power tools with frayed or damaged cords. Damaged parts anywhere in a power tool, including saw blades and drill bits, can cause damage to the tool itself or the individual performing the task. Unplug all electric power tools when finished with or before changing to another tool.

As far as the maintenance aspect of such power tools, common sense is again of the highest importance. For example, making sure that the proper guards are placed on saw blades when not in use is both a safety and maintenance issue. Saw blades need to be sharp to deliver the best performance possible, but can also be incredibly dangerous, so taking the proper preventive measures will yield the best results in all aspects, not just project outcome.

For more information on power tool basics, the U.S. government has many publications that can be of high value to consumers. The U.S. Consumer Product Safety Commission offers product recall information, and OSHA has a few such publishings regarding both general industry and personal use of power tools.

Best Guide to Tools

By Donald Lawson

Air tools are great work savers. However, for years most people thought you had to be either rich or a large full time auto repair shop to have an air system.

Fortunately for today's consumer, setting up an air system is fairly inexpensive and quick.

You can get started with just the basics and gradually add tools as you need them.

What You Need: The Basics

• An air compressor
• Hose
• Regultor & Guages
• Air Tools

Next Step: Choosing The Right Compressor

When choosing the compressor, you should have in mind the type of tools you'll be using. There should be a tag on the compressor that rates the "Air Delivery". It may say something like "5.9 AVG. SCFM @ 90 psi."

Now, on your air tool there is another number, this number is called the "Air Requirement" number. This number will look like "5.5 AVG. SCFM @ 90 psi."

All you have to do is make sure the "Air Delivery" number on the compressor is larger than the "Air Requirement" number on the tool or tools that you'll be using.

Next Step: Choosing the Right Fittings

There are two types of fitting for air tools. Industrial and Automotive. These two types of fittings CAN NOT be interchanged. You'll have to decide before buying components which style you want.

You'll also have to determine which size of fitting you want. Fittings are measured by the inside diameter (commonly called the ID). I personally prefer the 3/8ths over the 1/4 inch, but either will work well for the occasional user.

Be sure to choose the same NPT number on the air inlet of your tool as the fitting NPT number.

Next Step: Choosing the Hose System

You could just get by with air hoses laying all over the place, but that is dangerous and it makes your Garage or Shop look cluttered.

You should invest in either a reel storage system or coil hose if you you won't be far from the compressor.

Next Step: The Tools

As stated above. Decide early on which tools you'll be using and make sure your compressors "Air Delivery" rating is higher than the tools "Air Requirement" rating. One of the best practices to use it to determine what the largest tool that you will ever use is. For most of us that may be a Air Impact Wrench.

Setting up the system may sound complicated, but it's really rather easy. Should you need additional information about air tools and compressors, check out the only guides at Campbell Hausfeld at www.chpower.com.

Air Sanders: Forget electric, go air!
Author: Red Hill Supply

An air sander is a common air tool often overlooked by most people. If you already have an air compressor to run your impact wrench, you may consider purchasing an air sander instead of an electric model. Your average off the shelf electric sander is fine for little home projects. But if you are really concerned about production and speed, an air sander will blow it away. These tools are also more rugged, versatile and lighter. The main reason is the power source is your air compressor, not the little electric motor in the sander. This also makes them easier to fit into weird places and hold over your head to reach a ceiling. At the end of the day, an air sander is much kinder to your hands, while delivering more power. They also come in models that are both sanders and buffers. I really recommend one of these if you are a car or boat enthusiast. An air buffer will make quick work of a long wax job on your favorite ski boat. You can then turn around and use the same tool to sand down your kitchen cabinets for painting. Air sanders are really versatile tools and a great addition to your air tools for your garage compressor. There are also orbital sanders, dual action sanders and palm grip sanders for any application you might run across. It may be time to take a second look at that air compressor stuffed in the garage. They can do a lot more than just fill up tires and run impact wrenches.

Brought to you by AAArticles, and ABBlogs! ...

For more resources on Best Guide to Tools, see http://www.bestguidetotools.com!

Power tools are a great and effective tool for all those who like to renovate or build things. Whether it is your own home you want to add to or if you are in construction or carpentry for a living you are going to need to find yourself some quality power tools. But where are you supposed to find these great power tools? One of the best places for you to find power tools is online. You could go shopping at your local hardware stores but this can be very time consuming. If you were to go from store to store all across town it would take you a long time to compare the prices of power tools. You would also waste a significant amount of time shopping for your and a whole lot of gas. And with the gas prices being what they are now you do not want to be wasting it on shopping for power tools, do you? The best place to shop for power tools is online, hands down. By shopping for your power tools on the Internet you will be able to compare the prices of hundreds of stores in a matter of minutes. It does not matter the kind of power tools you are looking for, you will be able to find them all online with ease. You can even find many sales on power tools online, sales that simply cannot be beaten in stores. Part of the reason that you can get your power tools for so much less online is because these stores do not have the same amount of overhead that regular stores do. This means more savings on power tools for you and that is always the goal. If you can get the same quality power tools for less, shouldn’t you?
About the Author:Pete Towns is the owner of The Power Tool Place. (http://www.powertoolplace.com). Power Tool Place contains information and resources for people interested in learning more about and buying power tools.Read more articles by: Pete Towns This article is distributed by: www.iSnare.com

Value-priced, battery-operated power tools are beginning to emerge from the housewares business, landing on the shelves of drug stores, where they provide chains higher-ticket, higher-margin, more impulse-driven alternatives to more conventional, less profitable and less exciting hardware items.
The segment is evolving from just a few products made by Cleveland-based Igo Home Products, a designer and manufacturer of houseware tools and accessories. But it could be a gem of a new category that has appeal for men and women and is value-priced enough to generate incremental sales at above-average margins. Igo's offerings include the Kitchen Drawer Power Tools line, which features such items as powered screwdrivers and cordless, battery-operated drills retailing for less than $20.
Igo first found its way into the drug store industry in fourth quarter 2001 when Walgreens featured Igo's Grip & Drive, a battery-operated screwdriver, as a Christmas promotion. That item and a second one, Igo's Grip & Zip Cordless Drill, now are available every day at Walgreens. They also have been featured at Rite Aid, Longs, Eckerd, Kinney, Bartell and London Drugs.
Advertisement
document.write('');

');
}
// -->
"If you are looking for compact, high-margin items that generate impulse sales," one merchandising executive said, "these are the kinds of items you test. If they do well promotionally, then you find a home for them, and, since they are impulse items, a sidekick on an endcap works just fine."